| Number of I/O expansion module |
7 with local I/O architecture
14 with remote I/O architecture
|
| Supply voltage limits |
20.4…28.8 V
|
| Inrush current |
<= 50 A
|
| Power consumption in W |
32.6…40.4 W with max number of I/O expansion module
|
| Memory capacity |
8 MB program
64 MB system memory RAM
|
| Data backed up |
128 MB built-in flash memory for backup of user programs
|
| Data storage equipment |
<= 32 GB SD card optional
|
| Battery type |
BR2032 lithium non-rechargeable, battery life: 4 yr
|
| Backup time |
2 years at 25 °C
|
| Execution time for 1 KInstruction |
0.3 ms event and periodic task
0.7 ms other instruction
|
| Execution time per instruction |
0.022 µs
|
| Application structure |
8 event tasks
3 cyclic master tasks + 1 freewheeling task
4 cyclic master tasks
8 external event tasks
|
| Realtime clock |
With
|
| Clock drift |
<= 60 s/month at 25 °C
|
| Integrated connection type |
USB port with mini B USB 2.0 connector
Non isolated serial link «serial» with RJ45 connector; physical interface: RS232/RS485
Dual-port «Ethernet 1» with RJ45 connector
Ethernet port «Ethernet 2» with RJ45 connector
|
| Supply |
5 V at 200 mA serial link supply with «serial» marking
|
| Transmission rate |
1.2…115.2 kbit/s (115.2 kbit/s by default) for bus length of 15 m – communication protocol: RS485
1.2…115.2 kbit/s (115.2 kbit/s by default) for bus length of 3 m – communication protocol: RS232
480 Mbit/s for bus length of 3 m – communication protocol: USB
|
| Communication port protocol |
USB port – USB protocol ; transmission frame: SoMachine-Network
Non isolated serial link – Modbus protocol ; transmission frame: RTU/ASCII or SoMachine-Network with master/slave method
|
| Port Ethernet |
«Ethernet 1» marking 10BASE-T/100BASE-TX – 2 port copper cable
«Ethernet 2» marking 10BASE-T/100BASE-TX – 1 port copper cable
|
| Web services |
Web server
|
| Communication service |
FDR
Downloading
IEC VAR ACCESS
Modbus TCP client
Modbus TCP server
Modbus TCP slave device
Monitoring
NGVL
Programming
Updating firmware
SMS notifications
DHCP client (Eth1)
DHCP server (Eth2)
Ethernet/IP originator (Eth2)
Ethernet/IP target (Eth1, Eth2)
Ethernet/IP scanner (Eth2)
Modbus TCP I/O Scanner and Messaging (Eth2)
SNMP client/server
FTP client/server
SQL client
Send and receive email from the controller based on TCP/UDP library
Web server (WebVisu & XWeb system)
OPC UA server
DNS client
|
| Maximum number of connections |
8 Modbus server
8 Modbus client
16 Ethernet/IP target
4 FTP server
10 web server
8 SoMachine protocol
|
| Number of slave |
16 Ethernet/IP
64 Modbus TCP
|
| Cycle time |
64 ms with 64 slave(s) on Modbus TCP
10 ms with 16 slave(s) on Ethernet/IP
|
| Local signalling |
1 LED green for SD card access (SD)
1 LED red for BAT
1 LED green for SL
1 LED red for I/O error (I/O)
1 LED red for bus fault on TM4 (TM4)
1 LED green for Ethernet activity (ETH1)
1 LED green for Ethernet activity (ETH2)
1 LED red for module error (ERR)
1 LED green for PWR
1 LED green for RUN
|
| Electrical connection |
Removable screw terminal block for power supply with pitch 5.08 mm adjustment
|
| Insulation |
Non-insulated between supply and internal logic
Between supply and ground at 500 V AC
|
| Marking |
CE
|
| Surge withstand |
1 kV (shielded cable) with common mode protection conforming to EN/IEC 61000-4-5
1 kV (power lines) with common mode protection conforming to EN/IEC 61000-4-5
0.5 kV (power lines) with differential mode protection conforming to EN/IEC 61000-4-5
|
| Mounting support |
Top hat type TH35-15 rail conforming to IEC 60715
Top hat type TH35-7.5 rail conforming to IEC 60715
Plate or panel with fixing kit
|
| Height |
90 mm
|
| Depth |
95 mm
|
| Width |
54 mm
|
| Product weight |
0.22 kg
|
Schneider Electric declaration of conformity 
Valoraciones
No hay valoraciones aún.