| Local display |
With
|
| Number or control scheme lines |
0…500 with FBD programming
0…240 with ladder programming
|
| Cycle time |
6…90 ms
|
| Backup time |
10 yearsat 25 °C
|
| Clock drift |
6 s/monthat 25 °C
12 min/yearat 0…55 °C
|
| Checks |
Program memory on each power up
|
| [Us] rated supply voltage |
100…240 V AC
|
| Supply voltage limits |
85…264 V
|
| Supply frequency |
50/60 Hz
|
| Supply current |
30 mAat 240 V (without extension)
80 mAat 100 V (without extension)
|
| Power consumption in VA |
7 VA without extension
|
| Isolation voltage |
1780 V
|
| Protection type |
Against inversion of terminals (control instructions not executed)
|
| Discrete input number |
8
|
| Discrete input voltage |
100…240 V AC
|
| Discrete input current |
0.6 mA
|
| Discrete input frequency |
47…53 Hz
57…63 Hz
|
| Voltage state 1 guaranteed |
>= 79 Vfor discrete input
|
| Voltage state 0 guaranteed |
<= 40 Vfor discrete input
|
| Current state 1 guaranteed |
>= 0.17 mA for discrete input
|
| Current state 0 guaranteed |
<= 0.5 mA for discrete input
|
| Input impedance |
350 kOhm (discrete input)
|
| Number of outputs |
4 relay output(s)
|
| Output voltage limits |
24…250 V AC
5…30 V DC (relay output)
|
| Contacts type and composition |
NOfor relay output
|
| Output thermal current |
8 A for all 4 outputs (relay output)
|
| Electrical durability |
500000 cycles AC-12at 230 V, 1.5 Afor relay output conforming to EN/IEC 60947-5-1
500000 cycles AC-15at 230 V, 0.9 Afor relay output conforming to EN/IEC 60947-5-1
500000 cycles DC-12at 24 V, 1.5 Afor relay output conforming to EN/IEC 60947-5-1
500000 cycles DC-13at 24 V, 0.6 Afor relay output conforming to EN/IEC 60947-5-1
|
| Switching capacity in mA |
>= 10 mAat 12 V (relay output)
|
| Operating rate in Hz |
0.1 Hz (at Ie)for relay output
10 Hz (no load)for relay output
|
| Mechanical durability |
10000000 cycles (relay output)
|
| [Uimp] rated impulse withstand voltage |
4 kV conforming to EN/IEC 60947-1 and EN/IEC 60664-1
|
| Clock |
With
|
| Response time |
10 ms (from state 0 to state 1)for relay output
5 ms (from state 1 to state 0)for relay output
50 ms with ladder programming (from state 0 to state 1)for discrete input
50 ms with ladder programming (from state 1 to state 0)for discrete input
50…255 ms with FBD programming (from state 0 to state 1)for discrete input
50…255 ms with FBD programming (from state 1 to state 0)for discrete input
|
| Connections – terminals |
Screw terminals, clamping capacity: 1 x 0.2…1 x 2.5 mm² AWG 25…AWG 14 semi-solid
Screw terminals, clamping capacity: 1 x 0.2…1 x 2.5 mm² AWG 25…AWG 14 solid
Screw terminals, clamping capacity: 1 x 0.25…1 x 2.5 mm² AWG 24…AWG 14 flexible with cable end
Screw terminals, clamping capacity: 2 x 0.2…2 x 1.5 mm² AWG 24…AWG 16 solid
Screw terminals, clamping capacity: 2 x 0.25…2 x 0.75 mm² AWG 24…AWG 18 flexible with cable end
|
| Tightening torque |
0.5 N.m
|
| Overvoltage category |
III conforming to EN/IEC 60664-1
|
| Product weight |
0.25 kg
|
Valoraciones
No hay valoraciones aún.