Controlador PLC +pantalla HMI touch 5.7″ incorporado HMISCU8B5 marca Schneider E.

7,656.00Bs.

Controlador PLC +pantalla HMI touch 5.7″ incorporado HMISCU8B5 marca Schneider E.  con pantalla touch incorporada de 5.7″ a Color, de 8 entradas y 8 salidas Digitales, +Ana 4 In/2 Out, su versatilidad de comunicación le permite comunicarse con cualquier dispositivo de sus maquinas o procesos, bajo arquitecturas, Ethernet IP, Modbus, Usb, Can open.

Categoría: Etiquetas: , ,

Descripción

 

El HMISCU8B5 es un controlador PLC con pantalla touch incorporada de 5.7″ a Color , de 8 entradas y 8 salidas Digitales, +Ana 4 In/2 Out, su versatilidad de comunicación le permite comunicarse con cualquier dispositivo de sus maquinas o procesos, bajo arquitecturas, Ethernet IP, Modbus, Usb, Can open.

Characteristics

Main
range of product
Magelis SCU
product or component type
Small touch HMI controller
display size
5.7 inch
display type
Backlit LED colour TFT LCD
pixel resolution
320 x 240 pixels QVGA
touch panel
Analogue
Complementary
backlight lifespan
Lifespan: 50000 hours with 65000 colours
brightness
16 levels via touch panel
view angle horiz x vert
60° left
60° right
40° top
60° bottom
character font
ASCII
Chinese (simplified Chinese)
Japanese (ANK, Kanji)
Korean
Taiwanese (traditional Chinese)
supply
External source
[Us] rated supply voltage
24 V at 20.4…28.8 V DC
immunity to microbreaks
<= 10 ms
inrush current
<= 30 A
power consumption
24 W
local signalling
No indicator
number of pages
Limited by internal memory capacity
software designation
SoMachine
operating system
Magelis
processor name
CPU RISC
processor frequency
333 MHz
memory description
128 MB flash memory, type: NAND
128 kB internal data storage memory, type: FRAM
128 MB application run memory, type: DRAM
integrated connection type
1 Ethernet TCP/IP, connector type: RJ45
1 serial link, communication ports RS485/RS232, connector type: RJ45, transmission rate: <= 115.2 kbits/s
1 USB (V2.0) port, connector type: mini B USB
1 USB (V2.0) port, connector type: USB A
CANopen master bus, connector type: SUB-D 9
realtime clock
Built-in
downloadable protocols
Modbus
Modbus TCP/IP
CANopen
fixing mode
By 1 nut – diameter: Ø 22 mm, mounting on: 1…6 mm thick panel
enclosure material
PC/PBT and PAA
shock resistance
147 m/s² (duration=11 ms) conforming to IEC 60068-2-27 on DIN rail
294 m/s² (duration=6 ms) conforming to IEC 60068-2-27 on panel mounting
vibration resistance
+/- 3.5 mm (f=5…9 Hz) conforming to IEC 60068-2-6
1 gn (f=9…150 Hz) conforming to IEC 60068-2-6
electromagnetic compatibility
Electrostatic discharge immunity test – test level: 8 kV, air discharge conforming to IEC 61000-4-2
Electrostatic discharge immunity test – test level: 6 kV, contact discharge conforming to IEC 61000-4-2
Susceptibility to electromagnetic fields – test level: 10 V/m, 80 MHz…3 GHz conforming to IEC 61000-4-3
Electrical fast transient/burst immunity test – test level: 2 kV, power lines conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test – test level: 1 kV, between analogue I/O and operating voltage conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test – test level: 2 kV, relay wires conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test – test level: 1 kV, Ethernet line conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test – test level: 1 kV, COM line conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test – test level: 1 kV, CAN line conforming to IEC 61000-4-4
Surge immunity test – test level: 2 kV, power supply (common mode) conforming to IEC 61000-4-5
Surge immunity test – test level: 1 kV, power supply (differential mode) conforming to IEC 61000-4-5
Surge immunity test – test level: 1 kV common mode, digital I/O conforming to IEC 61000-4-5
Surge immunity test – test level: 0.5 kV differential mode, digital I/O conforming to IEC 61000-4-5
Conducted RF disturbances – test level: 10 V, 0.15…80 MHz conforming to IEC 61000-4-6
Conducted emission – test level: 150 kHz…30 MHz conforming to EN 55011
Radiated emission – test level: 30 MHz…1 GHz conforming to EN 55011
discrete input number
2 fast input (normal mode) conforming to IEC 61131-2 Type 1
6 digital input conforming to IEC 61131-2 Type 1
discrete input voltage
24 V DC discrete input logic:sink or source (positive/negative)
number of common point
1 fast input (HSC mode)
1 digital input
discrete input current
7.83 mA for fast input
5 mA for digital
input impedance
4.7 kOhm
2.81 kOhm
sensor power supply
15…28.8 V DC, voltage (state 1): >= 15 V, current (state 1): >= 5 mA, voltage (state 0): <= 5 V, current (state 0): <= 1.5 mA
15…28.8 V DC, voltage (state 1): >= 15 V, current (state 1): >= 2.5 mA, voltage (state 0): <= 5 V, current (state 0): <= 1 mA
configurable filtering time
0 ms no filter (none)
0.004…0.04 ms bounce filter (latch/event and cumulative filter by step Nx0.5ms (64>=N>=2))
3…12 ms integrator (none/run/stop)
input frequency
100 kHz for fast input (encoder mode) – control type A/B
100 kHz for fast input – control type single phase
100 kHz for fast input – control type pulse/direction
cable length
32.81 ft (10 m) shielded cable for fast input
328.08 ft (100 m) shielded cable for digital input
164.04 ft (50 m) unshielded cable for digital input
connection pitch
0.14 in (3.5 mm)
overvoltage protection
With
isolation between channels and internal logic
500 V DC
isolation between channels
None
discrete output number
2 fast output (normal mode), output logic: source
6 digital output, output logic: source
discrete output voltage
24 V DC (voltage limit: 19.2…28.8 V) with transistor discrete output(s)
24 V DC (voltage limit: 5…30 V) with relay discrete output(s)
220 V AC (voltage limit: 100…250 V) with relay discrete output(s)
input/output number
2 fast input, terminal(s): FI0…FI1
2 fast output, terminal(s): FQ0…FQ1
6 digital input, terminal(s): DI0…DI5
6 digital output, terminal(s): DQ0…DQ5
discrete output current
300 mA, response time 2 ms for fast output (normal mode)
50 mA, response time 2 ms for fast output (PWM or PTO mode)
2 A (current per output common:4 A), response time 5 ms with opening contact for digital output
2 A (current per output common:4 A), response time 2 ms with closing contact for digital output
insulation resistance
> 10 MOhm between the I/O and internal logic
> 10 MOhm between power supply and earth
output frequency
<= 100 kHz for fast output (PTO mode)
<= 1 kHz for fast output (PWM mode)
absolute accuracy error
+/- 0.1 % of full scale of cyclic ratio 1…99% fast output (PWM or PTO mode)
1 % of full scale of cyclic ratio 1…99% fast output (PWM or PTO mode)
+/- 5 % of full scale of cyclic ratio 10…90% fast output (PWM or PTO mode)
+/- 10 % of full scale of cyclic ratio 20…80% fast output (PWM or PTO mode)
+/- 15 % of full scale of cyclic ratio 30…70% fast output (PWM or PTO mode)
analogue input number
2 analog input
2 RTDs
analogue input range
0…20 mA/4…20 mA – resolution: 12 bits, input impedance: 250 Ohm (tolerance: +/- 1 %)
-10…+10 V or 0…10 V – resolution: 12 bits + sign, input impedance: >= 1 MOhm
analogue input type
RTD at – 200…600 °C – resolution: 16 bits temperature probe: Pt 100/Pt 1000
RTD at – 50…200 °C – resolution: 16 bits temperature probe: Ni 100/Ni 1000
RTD at – 200…760 °C – resolution: 16 bits (thermocouple J)
RTD at – 240…1370 °C – resolution: 16 bits (thermocouple K)
RTD at 0…1600 °C – resolution: 16 bits (thermocouple R)
RTD at 200…1800 °C – resolution: 16 bits (thermocouple B)
RTD at 0…1600 °C – resolution: 16 bits (thermocouple S)
RTD at – 200…400 °C – resolution: 16 bits (thermocouple T)
RTD at – 200…900 °C – resolution: 16 bits (thermocouple E)
RTD at – 200…1300 °C – resolution: 16 bits (thermocouple N)
analogue output number
2 resistive load 12 bits + sign
analogue output range
0…20 mA/4…20 mA (> 300 Ohm) for open-circuit
-10…10 V/0…10 V (> 2 kOhm) short-circuit
height
5.09 in (129.4 mm)
width
6.42 in (163 mm)
depth
3 in (76.22 mm)
product weight
1.77 lb(US) (0.803 kg)
Environment
standards
EN 61131-2
FCC Class A
IEC 61000-6-2
RoHS compliant
UL 508
ANSI/ISA 12-12-01
WEEE directive 2002/96/EC
CSA C22.2 No 213 Class I Division 2
RoHS China SJ/T 11363-2006
product certifications
C-Tick
CULus 508
GOST
CUL 1604 Class 1 Division 2
KCC
CULus CSA 22-2 No 142
marking
CE
ambient air temperature for operation
32…122 °F (0…50 °C)
ambient air temperature for storage
-4…140 °F (-20…60 °C)
relative humidity
5…85 % without condensation
operating altitude
<= 6561.68 ft (2000 m)
storage altitude
<= 32808.4 ft (10000 m)
maximum pressure
800…1114 hPa
IP degree of protection
IP65 front panel conforming to IEC 60529
IP20 rear panel conforming to IEC 60529
NEMA degree of protection
NEMA 4X front panel
pollution degree
2 conforming to IEC 60664
environmental characteristic
Corrosive gas free

 

 

Valoraciones

No hay valoraciones aún.

Sé el primero en valorar “Controlador PLC +pantalla HMI touch 5.7″ incorporado HMISCU8B5 marca Schneider E.”

También te recomendamos…